Tag number, field name, MsgType, message or component name, or a value such as 39=1 or OrdStatus=2. Search runs in your browser.
Common FIX tags: a plain-English guide
240 commonly used FIX tags, chosen by The MidPoint News and grouped by area. Each summary is ours, based on the description in FIX Trading Community's Orchestra file; the tag page quotes that description in full, with common values, the messages that use the tag and an illustrative example message.
Session, header and trailerOrders and order handlingExecutions and fillsInstrument identificationParties and accountsMarket dataQuotes and RFQsSecurity definitions and trading statusTrade capture and post-tradeAllocationsMultileg instruments
Session, header and trailer
7BeginSeqNo- BeginSeqNo is the sequence number of the first message in the range to be resent, on a ResendRequest.
8BeginString- BeginString opens every FIX message and identifies the session protocol version, which FIX Latest describes as a session profile identifier.
9BodyLength- BodyLength gives the length of the message in bytes, counted forward to the CheckSum (10) field.
10CheckSum- CheckSum is a three-character checksum and is always the last field.
16EndSeqNo- EndSeqNo is the sequence number of the last message in the range to be resent, on a ResendRequest.
34MsgSeqNum- MsgSeqNum is the integer sequence number of the message.
35MsgType- MsgType says what kind of message this is, such as a NewOrderSingle (D) or an ExecutionReport (8).
36NewSeqNo- NewSeqNo gives the new sequence number on a SequenceReset message.
43PossDupFlag- PossDupFlag marks a message that may be a retransmission of a message already sent with the same sequence number.
45RefSeqNum- RefSeqNum gives the sequence number of the message being referred to, on a session-level Reject or a BusinessMessageReject.
49SenderCompID- SenderCompID is the assigned identifier of the firm sending the message.
50SenderSubID- SenderSubID identifies the specific originator of a message within the sending firm, such as a desk or a trader.
52SendingTime- SendingTime is the time the message was transmitted, always expressed in UTC.
56TargetCompID- TargetCompID is the assigned identifier of the firm receiving the message.
57TargetSubID- TargetSubID identifies the specific individual or unit meant to receive a message.
58Text- Text is a free-format text string.
89Signature- Signature carries an electronic signature, with its length in SignatureLength (93).
90SecureDataLen- SecureDataLen gives the length of the encrypted data carried in SecureData (91).
91SecureData- SecureData carries the encrypted data stream, with its length in SecureDataLen (90).
93SignatureLength- SignatureLength gives the number of bytes in the Signature (89) field.
97PossResend- PossResend marks a message that may contain information already sent under a different sequence number.
98EncryptMethod- EncryptMethod, sent on the Logon message, states the method of encryption.
108HeartBtInt- HeartBtInt, sent on the Logon message, sets the heartbeat interval in seconds.
112TestReqID- TestReqID is the identifier carried on a TestRequest message.
115OnBehalfOfCompID- OnBehalfOfCompID identifies the firm that originated a message when a third party delivers it.
116OnBehalfOfSubID- OnBehalfOfSubID identifies the specific originator, such as a trader, of a message delivered by a third party.
122OrigSendingTime- OrigSendingTime carries the original transmission time, in UTC, of a message that is being sent again as the result of a resend request.
123GapFillFlag- GapFillFlag says whether a SequenceReset is filling a gap left by administrative or application messages that will not be resent (Y) or is a plain sequence reset (N).
128DeliverToCompID- DeliverToCompID identifies the firm a message is ultimately meant for when a third party delivers it.
129DeliverToSubID- DeliverToSubID identifies the specific recipient, such as a trader, of a message delivered by a third party.
141ResetSeqNumFlag- ResetSeqNumFlag says that both sides of the FIX session should reset their sequence numbers.
142SenderLocationID- SenderLocationID identifies the location of the message originator, such as a geographic location, desk or trader.
143TargetLocationID- TargetLocationID identifies the location of the message destination, such as a geographic location, desk or trader.
144OnBehalfOfLocationID- OnBehalfOfLocationID identifies the location of the message originator when a third party delivers the message.
145DeliverToLocationID- DeliverToLocationID identifies the location of the message recipient when a third party delivers the message.
354EncodedTextLen- EncodedTextLen gives the length in bytes of EncodedText (355), the non-ASCII version of Text (58).
355EncodedText- EncodedText carries a non-ASCII version of Text (58), in the encoding named by MessageEncoding (347).
371RefTagID- RefTagID gives the tag number of the field being referred to, for example the field that caused a session-level Reject.
372RefMsgType- RefMsgType gives the MsgType (35) of the message being referred to, for example on a Reject or BusinessMessageReject.
373SessionRejectReason- SessionRejectReason gives the reason code for a session-level Reject message, such as a missing required tag or an incorrect value.
379BusinessRejectRefID- BusinessRejectRefID carries the value of the business-level ID field, such as a ClOrdID, on the message being rejected by a BusinessMessageReject.
380BusinessRejectReason- BusinessRejectReason gives the reason code for a BusinessMessageReject, such as an unknown ID, an unknown security or an unsupported message type.
383MaxMessageSize- MaxMessageSize, sent on the Logon message, gives the largest single message, in bytes, that the sender supports.
553Username- Username carries the user ID or username, for example on the Logon message or a UserRequest.
554Password- Password carries a password or passphrase, for example on the Logon message or a UserRequest.
789NextExpectedMsgSeqNum- NextExpectedMsgSeqNum gives the next MsgSeqNum (34) the sender expects to receive.
925NewPassword- NewPassword carries a new password or passphrase, on the Logon message or a UserRequest.
1128ApplVerID- ApplVerID states which application-layer version applies to an individual message.
1129CstmApplVerID- CstmApplVerID names a custom extension applied to an individual message.
1137DefaultApplVerID- DefaultApplVerID, sent on the Logon message, sets the application version that applies by default to messages on the session.
Orders and order handling
11ClOrdID- ClOrdID is the buy side's unique identifier for an order, assigned by the firm in SenderCompID (49) or OnBehalfOfCompID (115).
15Currency- Currency identifies the currency used for price or quantity fields, depending on the asset class.
18ExecInst- ExecInst carries handling instructions for an order.
21HandlInst- HandlInst gives handling instructions for the broker: automated execution with no broker intervention, automated execution with intervention allowed, or a manual order.
37OrderID- OrderID is the sell side's unique identifier for an order, assigned by the broker, exchange or ECN.
38OrderQty- OrderQty is the quantity ordered: the number of shares for equities, or the par, face or nominal value for fixed income.
40OrdType- OrdType gives the order type, such as market, limit, stop or stop limit.
41OrigClOrdID- OrigClOrdID gives the ClOrdID (11) of the previous order, not the first order of the day, in cancel and cancel/replace requests and the responses to them.
44Price- Price is the price per unit of quantity, for example per share.
47Rule80A (FIX 4.2 only)- Rule80A (FIX 4.2) carried the capacity in which an order was placed.
54Side- Side says which side of the market an order is on, such as buy, sell or sell short.
59TimeInForce- TimeInForce says how long an order stays in effect.
60TransactTime- TransactTime is the time the business transaction the message represents took place.
63SettlType- SettlType gives the settlement period for an order.
64SettlDate- SettlDate is the specific settlement date, in YYYYMMDD format and in local time at the place of settlement.
66ListID- ListID is the institution's unique identifier for a list of orders, used to tie individual orders together.
67ListSeqNo- ListSeqNo gives an order's position within a list, such as 2 of 25, alongside TotNoOrders (68).
68TotNoOrders- TotNoOrders is the total number of list order entries across all messages for the same ListID (66).
73NoOrders- NoOrders counts the order entries in a repeating group, for example the orders in a NewOrderList.
75TradeDate- TradeDate is the date of the trading day, in local time at the place of trade.
77PositionEffect- PositionEffect says whether the position after a trade should be an opening or a closing position.
99StopPx- StopPx is the stop price of an order, expressed per unit of quantity (for example per share).
100ExDestination- ExDestination is the execution destination chosen by the institution when the order is entered.
102CxlRejReason- CxlRejReason gives the reason a cancel or cancel/replace request was rejected, on an OrderCancelReject.
103OrdRejReason- OrdRejReason gives the reason an order was rejected.
110MinQty- MinQty is the minimum quantity of an order to be executed.
111MaxFloor- MaxFloor is the quantity to be displayed on a reserve order; on execution reports it is the quantity currently displayed.
120SettlCurrency- SettlCurrency is the currency in which settlement is denominated.
126ExpireTime- ExpireTime is the date and time, in UTC, when something expires.
152CashOrderQty- CashOrderQty states the order size as an approximate amount of money rather than as a number of units.
168EffectiveTime- EffectiveTime is the time, in UTC, at which the details in the message should take effect.
210MaxShow- MaxShow is the largest part of an order, for example in shares, that may be shown to other customers through an IOI.
211PegOffsetValue- PegOffsetValue is the signed amount added to the peg price of a pegged order, read in the context of PegOffsetType (836).
336TradingSessionID- TradingSessionID identifies a trading session.
388DiscretionInst- DiscretionInst identifies the price that the discretion offset in DiscretionOffsetValue (389) is added to, such as the displayed price or the market price.
389DiscretionOffsetValue- DiscretionOffsetValue is the signed amount added to the price named in DiscretionInst (388), read in the context of DiscretionOffsetType (842).
423PriceType- PriceType says how a price is expressed, such as a percentage of par, per unit, a fixed amount, a spread or a yield.
432ExpireDate- ExpireDate is the last day an order can trade, expressed as a local market date.
434CxlRejResponseTo- CxlRejResponseTo says which request an OrderCancelReject is replying to: an OrderCancelRequest (1) or an OrderCancelReplaceRequest (2).
528OrderCapacity- OrderCapacity gives the capacity of the firm placing the order, such as agency, principal or riskless principal.
529OrderRestrictions- OrderRestrictions lists restrictions that apply to an order, such as program trade or algorithmic.
530MassCancelRequestType- MassCancelRequestType sets the scope of an Order Mass Cancel Request, such as all orders for a security, a trading session or all orders.
531MassCancelResponse- MassCancelResponse gives the action taken in reply to an Order Mass Cancel Request.
532MassCancelRejectReason- MassCancelRejectReason gives the reason an Order Mass Cancel Request was rejected.
548CrossID- CrossID identifies a cross order and must be unique during a trading day.
549CrossType- CrossType gives the type of cross being submitted to a market, such as all-or-none or immediate-or-cancel.
550CrossPrioritization- CrossPrioritization says whether one side of a cross order should be prioritised.
584MassStatusReqID- MassStatusReqID is the value the sender of an Order Mass Status Request gives it to identify the request uniquely.
625TradingSessionSubID- TradingSessionSubID optionally identifies a trading phase within a trading session, such as pre-trading, an opening auction or continuous trading.
790OrdStatusReqID- OrdStatusReqID can be used to identify a specific Order Status Request uniquely.
1094PegPriceType- PegPriceType sets the type of peg on a pegged order, such as last, mid-price, opening, market or primary peg.
1138DisplayQty- DisplayQty is the quantity to be displayed.
1300MarketSegmentID- MarketSegmentID identifies the market segment.
Executions and fills
6AvgPx- AvgPx is the average price of all fills on the order.
12Commission- Commission is the commission amount.
13CommType- CommType gives the basis used to calculate the commission, such as per unit, percentage or absolute amount.
14CumQty- CumQty is the total quantity, for example shares, filled on the order so far.
17ExecID- ExecID is the sell side's unique identifier for an execution message.
19ExecRefID- ExecRefID is a reference identifier used with the Trade, Trade Cancel and Trade Correct execution types.
20ExecTransType (FIX 4.2 only)- ExecTransType (FIX 4.2) identifies the transaction type of an execution report: new, cancel, correct or status.
29LastCapacity- LastCapacity gives the broker's capacity in executing the fill: agent, cross as agent, cross as principal, principal or riskless principal.
30LastMkt- LastMkt is the market where the last fill was executed, or an indication of where an order was routed.
31LastPx- LastPx is the price of this fill.
32LastQty- LastQty is the quantity, for example shares, bought or sold on this fill.
39OrdStatus- OrdStatus gives the current status of an order, such as new, partially filled, filled, cancelled or rejected.
118NetMoney- NetMoney is the total amount due from the transaction, for example principal plus commission and fees on a buy, in the currency of execution.
150ExecType- ExecType describes what a particular execution report is reporting, such as a new order, a cancel or a replace, while OrdStatus (39) always gives the order's current status.
151LeavesQty- LeavesQty is the quantity still open for execution.
198SecondaryOrderID- SecondaryOrderID is assigned by the party that accepts the order.
381GrossTradeAmt- GrossTradeAmt is the total amount traded in currency units, usually quantity times price.
527SecondaryExecID- SecondaryExecID is assigned by the party that accepts the order.
797CopyMsgIndicator- CopyMsgIndicator says whether the message is a drop copy of another message.
851LastLiquidityInd- LastLiquidityInd says whether this fill added liquidity, removed liquidity or was routed out, among other values.
880TrdMatchID- TrdMatchID is the identifier a matching system gives a match event that results in several executions or trades.
911TotNumReports- TotNumReports is the total number of reports sent in response to a request.
912LastRptRequested- LastRptRequested says whether this is the last report sent in response to a request, such as an Order Mass Status Request or a Trade Capture Report Request.
1057AggressorIndicator- AggressorIndicator says whether the order initiator was the aggressor (Y) or passive (N) in the trade.
Instrument identification
22SecurityIDSource- SecurityIDSource identifies the type of identifier in SecurityID (48), such as CUSIP, SEDOL, ISIN, RIC or exchange symbol.
48SecurityID- SecurityID is a security identifier, such as a CUSIP, SEDOL or ISIN.
55Symbol- Symbol is the ticker symbol: the common, human-readable name of the security.
65SymbolSfx- SymbolSfx carries extra information about the security, such as when-issued.
106Issuer- Issuer is the name of the security's issuer.
107SecurityDesc- SecurityDesc is a free-text description of the instrument that the venue or a trading party can provide.
167SecurityType- SecurityType gives the type of security, such as a future, option, common stock or corporate bond.
200MaturityMonthYear- MaturityMonthYear gives the month and year of maturity for standardised futures and options, as an alternative to MaturityDate (541).
201PutOrCall- PutOrCall says whether an option contract is a put, a call, a chooser or other.
202StrikePrice- StrikePrice is the strike price of an option.
205MaturityDay (FIX 4.2 only)- MaturityDay (FIX 4.2) is the day of the month, used with MaturityMonthYear (200) to give the maturity date of a future or option.
207SecurityExchange- SecurityExchange is the market used to help identify a security, for example its place of listing.
223CouponRate- CouponRate is the rate of interest that, multiplied by the principal, par or face value of a bond, gives the periodic interest payment.
231ContractMultiplier- ContractMultiplier is the factor that converts nominal units, such as contracts, into total units, such as shares: for example 1, 100 or 1000.
454NoSecurityAltID- NoSecurityAltID counts the alternative security identifiers that follow, each a SecurityAltID (455) with its SecurityAltIDSource (456).
455SecurityAltID- SecurityAltID is an alternative identifier for the security, such as a CUSIP, SEDOL or ISIN.
456SecurityAltIDSource- SecurityAltIDSource identifies the type of identifier in SecurityAltID (455).
460Product- Product gives the broad type of product a security belongs to, such as equity, government, corporate, currency or index.
461CFICode- CFICode classifies the security using the ISO 10962 Classification of Financial Instruments code.
541MaturityDate- MaturityDate is the date of maturity.
762SecuritySubType- SecuritySubType qualifies SecurityType (167).
1151SecurityGroup- SecurityGroup is an exchange-specific name for a group of related securities that may be affected together by market events and actions.
Parties and accounts
1Account- Account is the account mnemonic agreed between the buy side and the sell side, for example between a broker and an institution, or between an intermediary and a fund manager.
76ExecBroker (FIX 4.2 only)- ExecBroker (FIX 4.2) identifies the executing or give-up broker.
109ClientID (FIX 4.2 only)- ClientID (FIX 4.2) is a firm identifier used in third-party transactions.
447PartyIDSource- PartyIDSource identifies the type of identifier in PartyID (448), such as a BIC, an LEI, a MIC or a proprietary code.
448PartyID- PartyID is a party identifier or code.
452PartyRole- PartyRole gives the role of the party in PartyID (448), such as executing firm, clearing firm, client or entering firm.
453NoPartyIDs- NoPartyIDs counts the party entries in the Parties component.
523PartySubID- PartySubID is a sub-identifier for a party, such as a clearing account for a clearing firm, with its type in PartySubIDType (803).
581AccountType- AccountType gives the type of account associated with an order, such as a customer or house account.
660AcctIDSource- AcctIDSource identifies the source of the Account (1) code, such as a BIC or DTCC code.
802NoPartySubIDs- NoPartySubIDs counts the PartySubID (523) and PartySubIDType (803) entries for a party.
Market data
83RptSeq- RptSeq is the sequence number of a message within a report series.
146NoRelatedSym- NoRelatedSym counts the instruments that follow in a repeating group, for example the symbols on a Market Data Request or a Quote Request.
262MDReqID- MDReqID is the unique identifier of a Market Data Request.
263SubscriptionRequestType- SubscriptionRequestType says whether a request is for a snapshot only, a snapshot plus updates (a subscription), or to cancel an earlier subscription.
264MarketDepth- MarketDepth sets the depth of book for snapshots and incremental updates: 0 is the full book, 1 is top of book, and 2 or more is that number of levels.
265MDUpdateType- MDUpdateType says how updates should arrive on a subscription: as full refreshes (0) or incremental refreshes (1).
266AggregatedBook- AggregatedBook says whether book entries should be aggregated (Y) or not (N).
267NoMDEntryTypes- NoMDEntryTypes counts the MDEntryType (269) values requested on a Market Data Request.
268NoMDEntries- NoMDEntries counts the entries in a market data message, such as the bids, offers and trades in a snapshot or incremental refresh.
269MDEntryType- MDEntryType gives the type of a market data entry, such as bid, offer, trade, opening price, closing price or settlement price.
270MDEntryPx- MDEntryPx is the price of a market data entry.
271MDEntrySize- MDEntrySize is the quantity or volume of a market data entry.
272MDEntryDate- MDEntryDate is the date of a market data entry.
273MDEntryTime- MDEntryTime is the time of a market data entry.
276QuoteCondition- QuoteCondition is a space-separated list of conditions describing a quote, such as open, closed, locked or crossed.
277TradeCondition- TradeCondition carries one or more condition codes for a trade in market data, separated by spaces, such as opening or cash trade.
278MDEntryID- MDEntryID is a unique identifier for a market data entry.
279MDUpdateAction- MDUpdateAction says what an incremental refresh entry does to the book: add a new entry (0), change one (1) or delete one (2), among other actions.
280MDEntryRefID- MDEntryRefID refers to an earlier MDEntryID (278).
281MDReqRejReason- MDReqRejReason gives the reason a Market Data Request was rejected, such as an unknown symbol, a duplicate MDReqID or insufficient permissions.
286OpenCloseSettlFlag- OpenCloseSettlFlag flags a market data entry, for example as a daily open, a session open or a settlement entry.
290MDEntryPositionNo- MDEntryPositionNo is the display position of a bid or offer, numbered per side from the most competitive, starting at 1.
346NumberOfOrders- NumberOfOrders is the number of orders in the market behind a market data entry.
1021MDBookType- MDBookType describes the type of book a feed carries: top of book, price depth or order depth.
1022MDFeedType- MDFeedType describes a class of service for a data feed, for example regular or market maker, or bandwidth-intensive or bandwidth-conservative.
1023MDPriceLevel- MDPriceLevel gives the price level of a bid or offer in the book.
1070MDQuoteType- MDQuoteType identifies the type of quote in market data, such as indicative or tradeable.
1173MDSubBookType- MDSubBookType describes a class of sub book, for example to separate lot types.
Quotes and RFQs
62ValidUntilTime- ValidUntilTime is the time, in UTC, when an indication or quote expires.
117QuoteID- QuoteID is the unique identifier of a quote.
131QuoteReqID- QuoteReqID is the unique identifier of a Quote Request (35=R).
132BidPx- BidPx is the bid price or rate.
133OfferPx- OfferPx is the offer price or rate.
134BidSize- BidSize is the quantity bid.
135OfferSize- OfferSize is the quantity offered.
296NoQuoteSets- NoQuoteSets counts the sets of quotes in a message, such as a Mass Quote.
297QuoteStatus- QuoteStatus gives the status of a quote acknowledgement, such as accepted, rejected or expired.
298QuoteCancelType- QuoteCancelType sets which quotes a Quote Cancel removes, such as quotes for one or more securities, for an underlying, or all quotes.
299QuoteEntryID- QuoteEntryID is the identifier of an individual quote entry.
300QuoteRejectReason- QuoteRejectReason gives the reason a quote was rejected, such as an unknown symbol, an invalid price or exchange closed.
301QuoteResponseLevel- QuoteResponseLevel sets how much acknowledgement the sender wants back for its quotes, from none to an acknowledgement of each quote message.
303QuoteRequestType- QuoteRequestType says how a quote request was generated, such as manually or automatically.
537QuoteType- QuoteType gives the type of quote.
693QuoteRespID- QuoteRespID is the reference of a Quote Response message.
694QuoteRespType- QuoteRespType gives the type of a Quote Response, such as hit, counter, expired or pass.
Security definitions and trading status
320SecurityReqID- SecurityReqID is the unique ID of a Security Definition Request.
321SecurityRequestType- SecurityRequestType gives the type of Security Definition Request, for example to request a security's identity and specifications.
322SecurityResponseID- SecurityResponseID is the unique ID of a Security Definition message.
323SecurityResponseType- SecurityResponseType gives the type of response to a Security Definition Request, such as accept as is, accept with revisions or reject.
326SecurityTradingStatus- SecurityTradingStatus gives the trading status of a security, such as opening delay, trading halt, resumed or ready to trade.
327HaltReason- HaltReason gives the reason for a delay or halt, such as news dissemination, order imbalance or equipment changeover.
335TradSesReqID- TradSesReqID is described in the Orchestra file as the unique ID of a Trading Session Status message.
340TradSesStatus- TradSesStatus gives the state of a trading session, such as halted, open, closed, pre-open or pre-close.
393TotNoRelatedSym- TotNoRelatedSym is the total number of securities, for example across all the messages of a security list.
559SecurityListRequestType- SecurityListRequestType sets the criteria for a Security List Request, such as by symbol, by product, by trading session or all securities.
Trade capture and post-trade
487TradeReportTransType- TradeReportTransType gives the transaction type of a trade report, such as new, cancel or replace.
552NoSides- NoSides counts the side entries in a repeating group: one side or both sides, for example on a trade capture report or a cross order.
570PreviouslyReported- PreviouslyReported says whether the transaction was already reported to the counterparty or market.
571TradeReportID- TradeReportID is the unique identifier of a trade capture report.
572TradeReportRefID- TradeReportRefID is a reference identifier used with the cancel and replace transaction types of a trade report.
818SecondaryTradeReportID- SecondaryTradeReportID can associate an extra identifier with a trade report.
828TrdType- TrdType gives the type of a trade, such as regular trade, block trade or exchange for physical (EFP).
829TrdSubType- TrdSubType further qualifies the trade type given in TrdType (828).
856TradeReportType- TradeReportType gives the type of a trade report, such as submit, alleged, accept or decline.
1003TradeID- TradeID is the unique ID an exchange or central counterparty gives a trade once it is received or matched.
Allocations
53Quantity- Quantity is an overall or total quantity, for example the number of shares in an allocation.
70AllocID- AllocID is the unique identifier of an allocation message.
71AllocTransType- AllocTransType gives the transaction type of an allocation: new, replace, cancel or reversal.
78NoAllocs- NoAllocs counts the allocation entries in a repeating group, each giving an AllocAccount (79) and its quantity or price.
79AllocAccount- AllocAccount is the sub-account mnemonic an allocation goes to.
80AllocQty- AllocQty is the quantity to allocate to a specific sub-account.
87AllocStatus- AllocStatus gives the status of an allocation, such as accepted, block-level reject, account-level reject or received.
88AllocRejCode- AllocRejCode gives the reason an allocation was rejected, such as an unknown account, an incorrect quantity or an incorrect average price.
626AllocType- AllocType describes the type or purpose of an allocation message, such as calculated, preliminary or ready to book.
Multileg instruments
555NoLegs- NoLegs counts the instrument legs in a repeating group, for example on a multileg order or a strategy definition.
566LegPrice- LegPrice is the price for one leg of a multileg instrument.
600LegSymbol- LegSymbol is the Symbol of one leg of a multileg instrument.
623LegRatioQty- LegRatioQty is the ratio of quantity for one leg relative to the whole multileg instrument.
624LegSide- LegSide is the side of one leg of a multileg instrument.
654LegRefID- LegRefID identifies a specific leg.